Installing The Light Kit And Acrylic Shade - Kichler 300319 Mode D'emploi

INSTALLING THE LIGHT KIT AND ACRYLIC SHADE

NOTE: Before continuing installation, confirm that the power is still turned off NOTE: Before continuing installation, confirm that the power is still turned off
at the main circuit breaker or by removing the circuit fuse. Turning the power at the main circuit breaker or by removing the circuit fuse. Turning the power
off using a wall switch is not sufficient to prevent electrical stock. off using a wall switch is not sufficient to prevent electrical stock.
Step 1. Remove one of three screws on the light kit housing and keep for later Step 1. Remove one of three screws on the light kit housing and keep for later
use, loosen the other two (do not remove). (Fig. 21) use, loosen the other two (do not remove). (Fig. 21)
Step 2. Hold the light kit close to the light kit housing and connect the WHITE Step 2. Hold the light kit close to the light kit housing and connect the WHITE
wires from the light kit and fan by pushing the connectors together. Follow wires from the light kit and fan by pushing the connectors together. Follow
the same procedure with the BLACK wires. (Fig. 22) the same procedure with the BLACK wires. (Fig. 22)
Step 3. Tuck the connections neatly into the light kit. Place the two slot holes Step 3. Tuck the connections neatly into the light kit. Place the two slot holes
on the light kit over two (2) screws previously loosened from the light kit on the light kit over two (2) screws previously loosened from the light kit
housing. Rotate the light kit until it locks in place at the narrow end of the housing. Rotate the light kit until it locks in place at the narrow end of the
key holes. Securely tighten two(2) screws previously loosened and the one key holes. Securely tighten two(2) screws previously loosened and the one
previously removed. (Fig. 22) previously removed. (Fig. 22)
Step 4. Secure the acrylic shade to light kit housing by twisting in a clockwise Step 4 . Secure the acrylic shade to light kit housing by twisting in a clockwise
direction, twist the acrylic shade gradually until it snaps on to the light kit direction, twist the acrylic shade gradually until it snaps on to the light kit
housing. Do not over - tighten. (Fig. 23) housing. Do not over - tighten. (Fig. 23)
Light Kit Housing
Screw
Fig. 21
Light Kit Housing
Fig. 23
Light Kit
Fig. 22
Acrylic Shade
52" Dawn LED | 13