CARLO GAVAZZI WM50 Serie Manuel D'instructions page 28

TCD12
TCD12 identification
TCD12 configured and connected to WM50 is identified by the system via the combination of its three features:
serial number (on the top of the sensor)
l
physical position on the TCD bus (i.e.: A1 for TCD A bus TCD12 closest to WM50)
l
monitored channel group
l
The physical position and channel group are set in the configuration phase. The serial number is read and automatically
associated when the system detects it in the position indicated in configuration when connected with WM50.
WM50 - Instruction manual | 26/04/2022 | CARLO GAVAZZI Controls SpA
Essential information
27