Installation Options - Dimplex CDFI-TMHEAT Manuel Du Propriétaire

Heater Installation
Figure 2
128mm
5.04"
36mm
1.42"

Installation Options

The heater can be installed on its
own or with an Opti-myst cassette.
The unit needs to be installed so
that the heater outlet is horizontal
to the ground. The required
opening dimensions for the
heater are: 12.8" (326 mm) x 8.1"
(206 mm) x 3.5" (89 mm) deep.
!
NOTE: The heater does not
require any additional venting.
8
17mm
0.67"
MOUNTING
HOLES
LOCATION
206mm
8.11"
FRAMING
326mm
12.83"
FINISHED CEILING
MOUNTING OPENING
FOR REF.
360mm
14.17"
ref
!
NOTE: Install the heater so
that the pilot light can be seen
5 ft (153 cm) from the floor and
10 ft (305 cm) from the unit.
(Figure 3)
Example:
Distance from
floor
54"
36"
17mm
0.67"
Distance from
front wall
6"
2"
www.dimplex.com