Black Diamond HELIO 145 Manuel De Montage, D'utilisation Et D'entretien page 7

3.1| BOOT-BINDING COMPATIBILITY CHECK
WARNING! DANGER!
In walk mode, the contact point in between the boot and the front locking lever must not exceed the
vertical line marked at PICTURE 4 and 5.
PICTURE 4 shows a boot which is COMPATIBLE with the binding: the boot tip gets in touch with the
front lever in a point behind the vertical line marked on the picture.
PICTURE 5 shows a boot which is NOT COMPATIBLE with the binding: the boot tip gets in touch with
the front lever in a point over (even if slightly) the vertical line marked on the picture.
PICTURE 4 PICTURE 5
The use of a NON COMPATIBLE boot-binding combination is strictly FORBIDDEN, due to the high
risk of an undesired and/or accidental activation of the front locking lever of the binding that may be
moved from UPHILL WALKING MODE to DOWNHILL SKIING MODE during the uphill walking phase
with a great danger for the User's safety.
• Hook the boot at the binding and set it for the uphill walking mode. Rotate the boot on the toe up to
the front end of the rotation-range and verify that the boot is performing at least a 90° free
rotation. If the free rotation range is smaller than 90°, the boot tip and/or the front part of the
binding could be damaged by a regular use of the set. (PICTURE 6).
PICTURE 6
7