Black Diamond HELIO 145 Manuel De Montage, D'utilisation Et D'entretien page 3

2| GENERAL WARNINGS AND RECOMMENDATIONS
Before proceeding with any use, please make sure that you have fully understood what is written and
explained in this "INSTALLATION, USE and MAINTENANCE GUIDEBOOK ".
In case of any doubts and/or uncertainties, please contact the manufacturer for additions or
"HELIO" bindings DO NOT COMPLY WITH ANY DIN/ISO SAFETY STANDARD.
In particular, these bindings do not comply with DIN/ISO 11088 and DIN/ISO 13992 safety standards.
Therefore, the release systems offered by the "HELIO" bindings could fail in releasing the boot when
necessary and/or expected with a consequent greater danger for the User's safety.
• The "HELIO" binding is conceived, developed and produced for ski mountaineering competitions.
The high performances and the extreme lightness required to this product can influence and/or
reduce the safety features of the product itself, including the quality or repeatability of the boot
release in the event of a fall.
• The "HELIO" binding can only be used in combination with "RACE" category boots, with standard
"tech" inserts and general geometries that comply with market standards.
• The "HELIO" binding is provided with non-adjustable release systems in the heel part that are pre-
calibrated by the factory at fixed values. In particular the binding is offered in 4 different fixed
release values: 4, 6, 8 and 10. Choosing the most suitable release value based on the physical and
performance characteristics of the user may reduce the risk of injury to the limbs below the femur.
• The user, by removing the "SEAL OF LIABILITY" from the binding, consciously assumes all the
responsibility raising from the use of this product, and therefore releases BLACK DIAMOND from
any damage caused to himself and/or third parties during the use of the product.
WARNING! DANGER!
clarifications regarding any content of the manual.
WARNING! DANGER!
WARNING! DANGER!
3