Electrical Requirements - Westinghouse WSFCD3BK Manuel D'instructions

SAFETY INFORMATION

ELECTRICAL REQUIREMENTS

1. The mains voltage must match the information on the rating
label of the device.
2. The power plug is used as the disconnect device. Please be sure
that the power plug is in operable condition.
3. Only removing the power plug can separate the device
completely from the mains supply.
4. Avoid damages to the power cord that may be caused by kinks
or contact with sharp corners.
5. Make sure the device, including power cord and power plug are
not exposed to hot surfaces.
6. Only unplug from the power outlet by the plug itself. Do not
pull on the cord.
7. Disconnect the power plug when the device is not in use, in
case of malfunctions, prior to attaching accessories and prior to
each cleaning.
8. If the power cord or the casing of the device is damaged or if
the device is dropped, the device may not be used before it is
examined by a professional electrician.
9. A damaged power cord may only be replaced by the
manufacturer or a workshop commissioned by the
manufacturer or by a similarly qualified person in order to avoid
hazards.
WARNING - To reduce the risk of fire or electrical shock,
10.
do not use this product with any solid state speed control
device. To reduce the risk of fire or electric shock and injury to
persons, do not use near a window.
11. This product employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit situation. If the fuse
blows, unplug the product from the outlet. Replace the fuse
as per the user service instructions (follow marking for power
fuse rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product should
be discarded or returned to an authorized service facility for
examination and/or repair.
EN
6
WSFCD3BK_Multi Directional Stand Fan_EnFr_IB.indd 6 9/12/2019 12:01:01