Setting Up The Charging Bases; Installing Batteries In The Handsets; Charging The Handsets; Phone Line Connection - Motorola MD450 Serie Guide De L'utilisateur

Setting Up the Charging Bases

If you have expansion handsets, they do not need to
be plugged into a phone line. Simply plug the power
cord into the back of the charging base and into an
outlet wherever you want to place the handset.

Installing Batteries in the Handsets

Important: Before installing or handling batteries,
read the Battery Safety Instructions on page 8.
1. Remove the battery cover by pressing on the
recess and sliding down and off the handset.
2. Plug the connector into the receptacle.
3. Insert the battery into the compartment.
4. Slide and snap the battery cover back into place.
All manuals and user guides at all-guides.com
Black
Red
13

Charging the Handsets

Place the handset in the base station or charging
base. The LED is solid red when the handset is
charging.
For the initial charge, charge the battery for at
least 12 hours.

Phone Line Connection

Do not connect the base station to the phone line
until the handset is fully charged.
14
charge