Güde ECO Wheeler 415 P2 Traduction Du Mode D'emploi D'origine page 33

All manuals and user guides at all-guides.com
Fuel is highly flammable.
Keep the fuel in suitable containers only.
The appliance may only be refuelled outdoors and
not near open fire or burning cigarettes.
Refuel before starting the appliance. If the engine
is running or still hot, it must not be refuelled or
the tank cover opened.
Make sure the fuel does not overflow. If the
fuel overflows, the engine must not be started.
Remove any dirt from the appliance and prevent
any attempt at ignition until fuel fumes have
evaporated.
Replace all fuel tank and container caps securely.
The engine must necessarily be filled with engine oil
before being put into operation for the first time.
Check the oil level whenever the appliance is to be
put into operation. Add engine oil if necessary.
Carry out a visual inspection before any use to make
sure the appliance, especially the cutting tools,
fastening parts and the entire cutting unit are not
damaged.
Before using, always visually inspect to see
that the blades, blade bolts and cutter assembly
are not blunt, worn or damaged. Replace worn or
damaged blades and bolts in sets to preserve
balance;
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
Do not start the engine before your feet are in a safe
distance from the cutting tools.
Do not incline the appliance when being started.
Do not start the appliance when you are standing in
front of the ejection opening.
Walk! Never run!
Make sure your posture is safe, especially on slopes.
Do not cut on too steep slopes. Be particularly careful
when changing travelling direction on slopes.
Pay maximum attention when turning around and
pulling the appliance to you.
Switch the mower off whenever carrying or inclining
it or when being outside a grass area. Wait until all
rotating parts have stopped.
If an undesirable item is encountered or the appliance
starts vibrating, the appliance must be switched off
and the socket plug removed. Check whether the
appliance is not damaged. Repair any damage.
Switch the appliance immediately off after finishing
your work.
Stop the engine %and disconnect the spark plug wire,
make sure that all moving parts have come to a com-
plete stop and, where a key is fitted remove the key:
• whenever you leave the lawnmower
• before refuelling
Do not store the appliance in enclosed places just
after being switched off but let it cool down outdoors
instead.
Never store the appliance with petrol in the tank
inside a building where petrol fumes may potentially
get in touch with open fire or sparks.
Replace any defective muffler.
Do not change the controlled engine setting and do
not rev the engine up.
Avoid using the device in bad weather conditions,
particularly if there is a risk of lightning.
Disposal
Disposal notes are based on the icons placed on the
machine or on its package.
Any damaged or disposed devices must
be delivered to appropriate collection
centres.
Batteries, oil, and similar substances must
not enter the environment.
Transport packaging disposal
The packaging protects the machine against damage
during transport. Packaging materials are usually
chosen based on environment aspects and waste
treatment principles and are therefore recyclable. Re-
turning the packaging into material circulation saves
raw materials and reduces waste production. Parts of
packagings (e.g. foils, styropor®) can be dangerous
for children.
Risk of suffocation!
Keep parts of the packagings out of reach of children
and dispose them as soon as possible.
ENGLISH
29