Copy Function; Control Via The System Remote Control - Renkforce TP-1000 Notice D'emploi

Copy function

• Prepare the recording by undergoing steps described under "recording".
• Put a cassette that should be recorded into deck A.
• Choose a copy pace:
Press the button DUBBING (10), to copy the cassette with a normal pace.
Press the button HI.SP.DUB. (9), to copy the cassette with a double pace.

A normal speed pace garantuees a better copy quality.
Do not change the pace during the recording.
• Depending on the pace the display (4) flashes, above the button DUBBING (10) resp. HI.SP.DUB. (9) the
corresponding control-LED.
• Press button  PAUSE at deck B.
• Press the buttons REC and  PLAY from deck B at the same time.
• Press the button  PLAY of deck A and at the same time the button  PAUSE on deck B. The copy begins.
• During copying the display (4) flashes a red control LED on the right upper side.
• Press the button / STOP/EJ at both decks, to end the recording.
• Press the button / STOP/EJ at both decks again, to remove the cassette.

The copying ends automatically, when the tape ends.

Control via the system remote control

With the HiFi-amplifier A-1000 attached system remote control the Cassette deck can be switched off and on by
pressing the button POWER on the remote control.

Provided that the button POWER (1) at the cassette deck is in position ON.
All manuals and user guides at all-guides.com
29