Renkforce TP-1000 Notice D'emploi page 26

(4) Display reading
This display shows the gauge of the signals when recording resp. playing and also shows device conditions.
(5) Tape counter for deck B
With this Tape counter you can find certain tape points. Press the button beside the counter to set back to
000.
(6) REC LEVEL control
This control serves for adjusting the signal gauge when recording (only active when recording external audio
sources, when recording with deck A the recording will automatically be rejected).
(7) Recorder buttons
REC: Press this button at the same time with button  (PLAY) to start the recording.
 PLAY: Press this key for replay.
 REW: Press this key to rewind the cassette.
 FF: Press this key to forward the cassette.
/ STOP/EJ.: Press this button once to stop the driving function, press again to open the cassette case.
 PAUSE: Press this button to interrupt the replay or the recording shortly. By pressing again the brake
function will be switched off.
(8) Button REC CrO
2
Press the button to record to a CrO
(9) Button HI.SP.DUB.
With this button the fast copy function from deck A to deck B is activated (always only in combination with the
button DUBBING (10)).
(10) Button DUBBING
With this button the copy function from deck A to deck B is activated.
(11) Button PLAY CrO
2
Press the button to play a CrO
26
All manuals and user guides at all-guides.com
-Cassette.
2
-Cassette.
2
Operating Instructions

English