Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Installation Guide
CVC (LP)
Pilot valve
113
17
Fig. 1. CVC
Fig. 5. ICS + CVC
Fig. 6. ICS + CVC
© Danfoss A/S (AC-MCI/MWA), 2013-06
Fig. 3
Fig. 2
Fig. 7. ICS + EVM + CVC + A + B
Fig. 8. ICS + EVM + CVC + A + B
DKRCI.PI.HN0.M1.52 / 520H7786
Fig. 4. CVC - CHV
1

Publicité

loading

Sommaire des Matières pour Danfoss CVC

  • Page 1 Fig. 2 Fig. 4. CVC - CHV Fig. 5. ICS + CVC Fig. 7. ICS + EVM + CVC + A + B Fig. 6. ICS + CVC Fig. 8. ICS + EVM + CVC + A + B © Danfoss A/S (AC-MCI/MWA), 2013-06...
  • Page 2 (NV 17) - se fig. 1, pos. Fitting 106. O-ring 113. Møtrikken spændes med 10 +/- 2 Nm ved CVC is fitted in the top cover of the ICS main 107. Signaltilslutning fastholdt indstillingsspindel. valve, see figs. 5 and 7. Check that gaskets (A2) 108.
  • Page 3 NB! Wenn der O-Ring (A1) undicht ist oder ganz The orifice in CVC can be cleaned with fehlt, bekommt das Hauptventil ein Öffnungs- Siehe Ersatzteilkatalog. compressed air. Screw off the CVC and draw the signal. Zubehör regulation part out of the banjo fitting (103).
  • Page 4 à l’aide du raccord fig. 3. La conduite automatique avec raccord flare (fig. 2), numéro de commande venant de la CVC doit être reliée à de code 027B2041 ; pour l'ammoniac : raccord à souder ∅6,5 /∅10 mm (fig. 3) numéro de code l’endroit dont on désire régler la pression, p.ex.,...

Ce manuel est également adapté pour:

Cvc-xp