Publicité
Liens rapides
Fig. 1
Fig. 4
DKRCI.PI.HS0.C1.52 / 520H4132
Instructions
Fig. 2
Fig. 5
Plug 027H1196
for ICS3E
Blændprop til ICS3E
Montering
Skal der være passage for styretryk igennem
en tilslutning, anvendes prop A alene. Skal
passagen lukkes for styretryk, anvendes prop A +
B. Se fig. 1 - 4.
S = serie
P = parallel
Propperne har nøglevidden 32 mm og bør
tilspændes med et moment på 50 Nm (5 kPm).
Fig. 3
Reservedele
A+B+101+102. Best.nr. 027H1196
Blanking plug for ICS3E
Fitting
Use plug A in order to create passage for pilot
pressure. Use plugs A and B to close a passage.
See figs. 1 - 4.
S = series
P = parallel
The plugs are 32 mm across spanner flats and
should be tightened to a torque of 50 Nm (37 lb
force ft).
ICS3E
Spare parts
A+B+101+102. Code No. 027H1196
danSk
EnGLISH
© Danfoss A/S (IR/MWA), 02-2010
Publicité
Manuels Connexes pour Danfoss 027H1196
Sommaire des Matières pour Danfoss 027H1196
- Page 1 The plugs are 32 mm across spanner flats and should be tightened to a torque of 50 Nm (37 lb force ft). ICS3E Fig. 4 Fig. 5 Spare parts A+B+101+102. Code No. 027H1196 DKRCI.PI.HS0.C1.52 / 520H4132 © Danfoss A/S (IR/MWA), 02-2010...
- Page 2 Les bouchons d’une ouverture de clé de 32 mm doivent être serrés à un couple de 50 Nm (5 kgf.m.) Pièces de rechange ICS3E A+B+101+102. N° de code 027H1196 Fig. 4 Fig. 5 DKRCI.PI.HS0.C1.52 / 520H4132 © Danfoss A/S (IR/MWA), 02-2010...