Renkforce RF-DAB-Retro1 Notice D'emploi page 42

All manuals and user guides at all-guides.com
Calling station information
• Push the INFO button (6) to display various types of information on the station on the display.
• Push the INFO button (6) once more to move to the next display.
• The contents of the displayed information depend on the station.
Changing the display
• Push the dial switch (11) to enlarge the display.
• When the station transmits several images, the display (12) will show these images in
sequence.
• Pushing the dial switch (11) again will switch the display back to its normal size.
Further operating options can be found in the menu
• Push the button MENU (5) to display the menu.
• The following menu items refer to DAB operation.
Station list
Scan
Manual Tune
Prune Invalid
Stations
DRC
Station Order
Calls the station list with the receivable stations.
Select a station and push the dial switch (11) again to play it back.
Conducts a station scan as when activating DAB operation and
updates the station list
Manual selection of the transmission frequency with indication of the
signal strength
Deletes inactive stations from the station list
This function compresses playback of sound to make low sounds
better audible at a low volume or loud environment.
There are three compression rates available.
This function specifies the arrangement of the stations in the station
list.
The following options are available:
Arrangement in alphanumeric sequence
Arrangement by ensemble
Arrangement by active/inactive stations
35