ATIKA MHB 80 Notice Originale page 21

Masquer les pouces Voir aussi pour MHB 80:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
5.
Pull the cranking rope starter.
Cranking rope starter:
Slightly pull the handle of the cranking rope starter until you
feel some resistance and then pull it vigorously.
Let the cranking rope handle slowly return to its starting
position.
CRANKING
6.
If the choke lever for cold starting the engine was in the
CLOSED position, move it slowly to the OPEN position while
the engine warms up.
CHOKE LEVER
STOPPING THE ENGINE
To stop the engine in an emergency situation simply set the
ignition switch to OFF.
Proceed as follows under normal conditions:
1.
Set the throttle lever to SLOW.
2.
Turn the ignition switch to OFF ( O ) .
SLOW
19
All manuals and user guides at all-guides.com
FUEL
VALVE
OPEN
OFF
OPERATION / MAINTENANCE
3.
Set the fuel valve to OFF.
OFF
ADJUSTING THE ENGINE SPEED
Set the throttle lever to FAST.
Set the throttle lever to the required speed.
6. MAINTENANCE
Proper maintenance is indispensible for safe, economic and
troublefree operation. It also reduces air pollution.
Improper maintenance or neglecting to correct a fault before
starting the unit may cause operating malfunctions which might
lead to serious injuries or death.
Follow the inspection and maintenance directions of these
operating instructions.
The following pages contain a maintenance plan, routine
inspections and simple maintenance measures with simple tools to
help you with the proper maintenance of your engine. Let customer
service carry out more difficult service tasks or tasks that require
special tools.
FAST

Publicité

Table des Matières
loading

Table des Matières