Fcc Caution - Black Diamond JetForce PRO Backpack Notice D'utilisation

5. Inspect the wiring for exposed conductors or weakened connections with the
other components.
6. Inspect the backpack for punctures or tears.
7. Inspect the backpack shoulder straps, leg strap, and waist belt for tears or
damaged stitching.
8. After repacking the airbag, arm the system to confirm proper operation.
If inspection reveals signs of damage or if you have any doubts about the depend-
ability of your JetForce PRO Backpack, contact your pack manufacturer's cus-
tomer service center.
Retirement
Damaged gear must be repaired prior to use or retired and destroyed to prevent
future use.
Contact your pack manufacturer's customer service center if:
• The JetForce PRO Backpack's electronic system does not arm properly
or does not deploy the airbag properly. Perform the procedures in the
Troubleshooting section of this manual before contacting your pack
manufacturer's customer service center.
• Battery becomes too hot to touch (48°C (118°F) or above)
• Airbag is damaged and will not hold air.
• Structural webbing or bar tacks are torn, abraded, cut, melted or burnt.
• If you have any doubts about the dependability of your gear, retire it.
• Lithium-Ion batteries are subject to local disposal and recycling regulations.
Always follow local requirements when disposing of any battery. Do not
dispose of any battery in fire.
• Never use a damaged battery.
Lifespan
The JetForce PRO System is certified for 50 full deployments. With normal use
and proper care the typical lifespan of a JetForce PRO Backpack is five years.
The actual lifespan can be longer or shorter depending on how frequently you
use it and on the conditions of its use. The maximum lifespan of a JetForce PRO
Backpack is up to 10 years from the date of manufacture, even if unused and
properly stored.
Upon reaching the rated number of deployments or maximum lifespan, the pack
must be retired and destroyed to prevent future use.
Factors that will reduce the lifespan of a JetForce PRO Backpack: Falls, abrasion,
wear, prolonged exposure to sunlight, salt water/air, corrosive chemicals, harsh
environments or misuse of the battery.
The typical estimated lifespan of your replaceable Lithium-Ion battery is three to
five years. All Lithium-Ion batteries deteriorate with age.
SPECIFICATIONS
• Allowable operating temperature: -30°C to 45°C (-22°F to 113°F)
• Optimal storage temperature of the battery: 0°C to 23°C (32°F to 73°F)
• Allowable storage temperature: -35°C to 55°C (-31°F to 130°F)
• Allowable charging temperature: 0°C to 45°C (32°F to 113°F)
• Charging power supply:
• GlobTek, Inc. Model#GTM91120-3024-T2
• Input: 110/220 V AC, 50-60 Hz.
• Output: 5-40 V DC, 1.5 Amps
• Battery specification:
• Nominal charging voltage: 24 V DC
• Internal: 28.8 V DC, 2.0 Ah/57.6 Wh
• Operating elevation: 0m to 6000m (19,700 ft)
• JetForce PRO Lithium-Ion Battery, Part # 12643
• JetForce PRO Airbag Control Module, Part # 12644
• Bluetooth transmission frequency: 2.402 – 2.480GHz
®
• BlueTooth transmit power: 0 dBm
®
MARKINGS (WHEN PRESENT)
Black Diamond: Black Diamond brand name and name of the manufacturer.
: Black Diamond's logo.
PIEPS: PIEPS brand name
: PIEPS logo.
JetForce PRO 25: Example of a model name.
: The CE mark of conformity and indicates fulfillment of the requirements
of the Personal Protective Equipment Regulation (EU) 2016/425. Notified
body performing the EC type examination: TÜV SÜD Product Service GmbH,
Daimlerstraße 11, D-85748 Garching, Germany, NB No 0123.
2017-05 : Manufacturing Date of May 2017.
XXXXXXXXXXXX: 12-digit serial number unique to each pack.
: Instruction pictogram advising users to read the instructions and warnings.
EN 16716:2017: The JetForce PRO Backpack conforms to EN 16716:2017,
Mountaineering equipment - Avalanche airbag systems - Safety requirements
and test methods.
: Class 3 appliance designed to be charged using a safety extra-low voltage
power supply.
: IEC symbol indicating that a specific separate supply unit is required for
connecting electrical equipment to the supply mains.
: FCC symbol indicating that the device has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
: Illustration showing the polarity of the charge plug for the JetForce
PRO Airbag charger.
: Wheelie bin symbol advising users to dispose of waste electrical and
electronic equipment separately from unsorted municipal waste.
IP65: International Protection Marking, indicating that the JetForce PRO Li-Ion
Battery and Airbag Control Module are dust tight and will withstand a water jet
without harmful effects per IEC 60529.
: The universal recycling symbol.
The Declaration of Conformity for this product may be viewed at
http:blackdiamondequipment.com/DOC
Black Diamond is an ISO 9001 certified company.
FCC NOTICE:
Contains FCC ID:VPYLBZY
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

FCC CAUTION:

Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines. This equipment has very low levels of RF energy that it deemed to
comply without maximum permissive exposure evaluation (MPE).
IC NOTICE:
Contains IC: 772C-LBZY
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncon-
trolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure
rules. This equipment has very low levels of RF energy that are deemed to comply
without testing of specific absorption ratio (SAR).
LIMITED WARRANTY
For the following period after the purchase date, unless otherwise indicated by
law, we will warrant to the original retail buyer only that our products are free
from defects in material and workmanship as originally sold. Back Pack and
Components: 3 years; Lithium-Ion Battery: 1 year. If you receive a defective prod-
uct, return it to us and we will replace it subject to the following conditions: We do
not warrant products which show normal wear and tear or that have been used or
maintained improperly, modified or altered, or damaged in any manner.
7