Installation Surface - Olsberg INARA 2.0 Mode D'emploi Pour L'utilisateur

Poêle à granulés

page de 156

/ 156
Matières
Table des Matières
Signets

Table des Matières

Les langues disponibles

Installation instructions

for the specialist company

2.6 Place of installation and installation requirements

800

Abb. 2.12 Mindestabstände

| 154

800

Minimum distances from flammable objects

ū No objects made from flammable material may be present or

placed in the radiation range of the pellet fireplace (min. distance

of 800 mm, measured from the viewing window in the combus-

tion chamber door).

ū The distance from the pellet fireplace to flammable materials or

walls to be protected must be at least 100 mm at the rear and to

the sides.

ū The minimum distance to the side and front is 800 mm from the

heat radiation range of the panels.

ū The distance from the exhaust pipe to flammable objects must be

at least 95 mm.

Spark protection plate (Olsberg recommendation)

ū Olsberg recommends using a sturdy and non-flammable spark

protection plate with flammable floors or carpets.

ū The spark protection plate should protrude forwards by 50 cm

and 30 cm to the sides around the combustion chamber open-

ing here.

ū No spark protection plate is required under the pellet stove and

under the exhaust pipe.

Humidity and living space temperatures

ū The pellet fireplace is designed for operation in living spaces with

normal humidity and living space temperatures of +5 °C to +25

°C (ambient temperature during operation). Safety devices may

come into effect during operation at higher temperatures. Please

observe the appropriate information concerning heating opera-

tion here.

Splash protection

ū The pellet fireplace does not have splash protection and may not

be placed in wet rooms.