Environment Friendly Disposal; Warranty Exclusions - Brabantia BBEK1081 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2.
Always allow the unit to cool down completely.
3.
Remove the glass lid and the ceramic bowl and wash them in hot soapy water. If any
food is attached to the bottom, soak the ceramic bowl in warm water and then scrub
gently with a plastic scourer or brush. Rinse and dry thoroughly.
4.
Do not immerse the outer body in water or any other liquid.
5.
Wipe the body of the Slow Cooker with a damp cloth and use a dry cloth to wipe down
the interior.
6.
Do not use any abrasive cleaners as these may damage the finish on the outer housing.
7.
Do not fill the ceramic bowl with cold water if the bowl is still warm after cooking.
8.
Avoid subjecting the cooking pot to rapid changes of temperature,such as pouring cold
water into a warm cooking pot, as this may cause damage to the cooking pot.
SPECIFICATIONS
Rated voltage/ Frequency: 220-240V~50/60Hz
Rated power: 180W

ENVIRONMENT FRIENDLY DISPOSAL

This marking indicates that this product should not be disposed of with household
waste. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote the sustainable
re-use of material resources. To dispose of your appliance correctly, please contact or
take it to your local refuse/recycling centre. Alternatively, contact your local council
for information on your local re-use centre. Please make this product environmentally safe
for recycling.
WARRANTY
In the unlikely event that you have a problem with your Brabantia appliance, please be aware
that your Brabantia appliance has a 2 year warranty.

Warranty exclusions:

The warranty will not be valid if:
1.
The product has not been installed, operated or maintained in accordance with
the manufacturer's operating instructions provided with the product.
2.
The product has been used for any purpose other than its intended function.
3.
The damage or malfunction of the product is caused by any of the following:
- Incorrect voltage
- Accidents (including liquid or moisture damage)
- Misuse or abuse of the product

Publicité

Table des Matières
loading

Table des Matières