Dexibell CLASSICO L3 Guide Rapide page 14

6
Quick Guide
Organ Sound
Orchestral Sound
BASS
ORCHESTRA
Adjust the AUDIO IN Level
1.
Rotate the knob to set the input level of the signals
received via AUDIO IN sockets.
Change the Organ Sound Set
By switching between sound set, you can change the overall
tonal character and feel of the entire organ. "USER 1" and
"USER 2" allow you to import sounds set downloadable from
www.dexibell.com. site.
1.
Press the button repeatedly until the indicator of the desired sound set
lights..
Select a Classical Tuning
You can adjust the reference pitch by choosing one of seven
classic fixed settings: 392Hz, 415Hz, 432Hz, 440Hz (default),
442Hz, 444Hz, 466Hz.
If you're playing the CLASSICO L3 together with other
instruments in an ensemble, you can adjust the pitch ([FINE]
knob) to match the other instruments if necessary.
1.
Press the [PRESET ] button repeatedly until the indicator of the desired
pitch lights.
2.
Rotate the [FINE] knob to adjust the tune, if necessary.
14
Orchestral Sound
ORGAN
Selecting a Piano Sound
MANUAL I division
These buttons allow you to select piano sounds for the relative
division. The Piano section cannot be used at the same time as
the Organ, and Orchestral. Each category can contain up to 4
sound variations (Refer to the owner's manual)
1.
Press one of buttons of the "PIANO" section to recall a sound.
The indicator will light, and the sound will be selected.
PIANO HARPSICHORD
TUNING TEMPERAMENT
Select a Temperament (SCALE)
The CLASSICO L3 allows you to easily change the
temperament.
1.
Press the [SCALE] button repeatedly until the indicator of the desired
temperament lights.
Improve the sound (CHORD ENHANCER)
This function improves the sound of the STRING and CHOIR
family adding notes to the played chord.
1.
Select a sound of the STRING and CHOIR family.
2.
Press the [CHORD ENHANCER] to activate the function.
The [ENHANCER] button indicator lights and the Chord Enhancer function is active
3.
Play a chord on the keyboard.
The Chord Enhancer function adds notes to the chord you played.
FUNCTION/EXIT
1.
Press and hold the [FUNCTION/EXIT] to enter the function mode.
2.
Press the Tilt Tabs to enable or disable functions..
Change the Pitch of the Keyboard (TRANSPOSE)
You can transpose your playing without changing the position at which you play the
keys.
1.
Use the [-] [+] buttons to adjust the transposition.
The indicator shows the transposition value.
Organ Sound
TRANSPOSE
0 1 2