Fibre Channel Pass-Through Module
Externally accessible connectors
Fibre Channel transceiver
Brocade Fibre Channel Switch Module
Externally accessible connectors
Fibre Channel
Serial Port
Environmental
NOTE:
For additional information about environmental measurements for specific
system configurations, see dell.com/environmental_datasheets. The system is not for
use in an office environment.
Temperature
Operating
Storage
Relative humidity
Operating
Storage
Maximum vibration
Operating
Storage
20
Getting Started With Your System
Sixteen external SFP ports that support
1/2/4-Gbps FC speeds
Eight physical FC ports (four enabled by
default, upgradeable to eight) supporting
1/2/4-Gbps Fibre Channel connections
RJ-45
10° to 35°C (50° to 95°F)
NOTE:
Decrease the maximum
temperature by 1°C (1.8°F) per 300 m (985 ft)
above 900 m (2955 ft).
–40° to 65°C (–40° to 149°F)
8% to 85% (noncondensing) with a
maximum humidity gradation of 10% per
hour
5% to 95% (noncondensing)
0.26 Grms at 10–350 Hz for 15 min
1.54 Grms at 10–250 Hz for 15 min