Lighting System - Franke FAK 607 Mode D'emploi Et Installation

REPLACING OF THE LAMPS
20 W halogen lamps
• Loose the 2 fixing screws of the lighting support and remove
the support from the hood.
• Take off the lamp from the support.
• Replace the lamp with a new one. Make sure that the pins are
correctly seated in the support.
• Place the support again in its place. Fix it with the screws
which were earlier removed.
The 90 cm hood version is equipped with halogen lamps (20W)
placed in the upper part of the hood.
When replacing the lamps proceed as follows:
• Remove the metallic glass holder by levering it from under the
metal ring, supporting it with one hand.
• Remove the halogen lamp from the lamp holder.
• Replace the lamp with a new one. Make sure that the pins are
correctly seated in the support.
• Place the glass holder again in its place.
EN
All manuals and user guides at all-guides.com

Lighting system

1 12