Remote Control (Optional) - Franke FAK 607 Mode D'emploi Et Installation

MAINTENANCE

REMOTE CONTROL (OPTIONAL)

The appliance can be controlled using a remote control powered
by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-
AAA type (not included).
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper manner.
Metal filters can be washed also in a dish machine. They need to
be washed every time a FF-symbol appears in the display or at
least every two months. In case of very frequent use these have to
be washed even more often.
Alarm reset
• Switch off the lights and the motor. If the 24h mode is acti-
vated it is necessary to switch it off.
• Press the E-key until the display is unlit.
Cleaning
• Open the comfort panel pulling them slightly.
• Remove the filters one by one by pushing them backwards and
pulling them down contemporaneously.
• Wash the filters. Pay attention not to bend them. Make sure
that filters are completely dry before putting them into their
seat. (a possible modification of the filter surface doesn't influ-
ence its efficiency).
• Place the filters again into their seats and make sure that the
handle of the filter remains outside.
• Close the comfort panel.
EN
All manuals and user guides at all-guides.com
Metal grease filters
1 10