EN
42
DLNA/UPNP
You can change the device name as required. The following information is
an introduction to how to stream media from a PC or other media server.
If necessary, check the information of the software/apps you are using to
stream music. Make sure that the music files to stream to the radio are in
MP3, WHA, WAV or AAC format.
UPnP
Connect the PC to the network. Make sure that the radio is turned on and
connected to the same network as the PC. Open the UPnP platform Windows
Media Player (11 or later). It is also possible to use platforms other than
Windows Media Player. Set your PC/mobile device to share media with your
radio. Add the audio files and folders that you want to share with the radio to
the media library. You can also stream music from mobile devices (Android).
Connect the mobile device to the same network as the radio. Find and install
apps for sharing media on Google Play. Add audio files you want to share
from your mobile device. After setting up the shared server, you can select the
music you want to play on the radio.
DLNA
Apart from UPnP, the radio supports the DLNA function, which allows you to
share music files from PCs or Android devices and control the music playback
of the radio from your PC, Android device or iPhone/iPad (it is not necessary
to control the music playback from the radio). The PC requirement for DLNA is
Windows 7 and Windows Media Player 12.
Share the media on your PC with the radio first:
Control Panel > Network and Internet > Network and Sharing Center >
Change Advanced Sharing > Media streaming options.
Open Windows Media Player to allow remote control. Right-click the music in
the library and select the radio. A control window for the radio will open.