Range Hood; Important; Before You Start - KitchenAid Pro Line Serie Instructions D'installation Et Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour Pro Line Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before you
start...
Your safety and the safety
of others is very important.
We have provided many important
safety messages in this manual and
on your appliance. Always read and
obey all safety messages.
This is the safety alert
symbol. This symbol alerts
you to potential hazards
that can kill or hurt you and others.
All safety messages will follow the
safety alert symbol and either the
word "DANGER" or "WARNING".
These words mean:
DANGER
You can be killed or seriously
injured if you don't immediately
follow instructions.
WARNING
You can be killed or seriously
injured if you don't follow
instructions.
All safety messages will tell you what
the potential hazard is, tell you how
to reduce the chance of injury, and
tell you what can happen if the
instructions are not followed.
2
All manuals and user guides at all-guides.com
Important: Observe all
governing codes and
ordinances.
Proper installation is your responsibility:
• Have a qualified technician install this

range hood.

• Comply with installation clearances
specified on the model/serial rating
plate.
The model/serial rating plate is located
inside the range hood on the rear wall.
Range hood location should be away
from strong draft areas, such as windows,
doors and strong heating vents.
Cabinet opening dimensions that are
shown must be used. Given dimensions
provide minimum clearance. Consult your
cooktop/range manufacturer installation
instructions before making any cutouts.
Grounded electrical outlet is required.
See "Electrical requirements."
WARNING — TO REDUCE THE RISK
OF FIRE, ELECTRIC SHOCK, OR
INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
Installation work and electrical wiring
must be done by qualified person(s) in
accordance with all applicable Codes
and Standards, including Fire Rated
Construction. The combustion airflow
needed for safe operation of fuel-
burning equipment may be affected by
this unit's operation. Follow the heating
equipment manufacturer's guideline
and safety standards such as those
published by the National Fire
Protection Association (NFPA), and the
American Society of Heating,
Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local
code authorities.
When cutting or drilling into wall or
ceiling, do not damage electrical wiring
and other hidden utilities.
Ducted fans must always be vented to
the outdoors.
WARNING — To reduce the risk of fire,
use only metal ductwork.
This unit must be grounded.
This range hood is shipped to vent to the
outside. Non-vented (recirculating)
installations require a conversion kit. See
"For non-vented (recirculating)
installations" on this page.
For non-vented
(recirculating)
installations:
Kit No. 8285505 (for Stainless Steel
hoods) or Kit No. 8285506 (for Meteorite
color hoods) is required and is available
from your dealer. See page 4 for chimney
dimensions.
Note: It is recommended that when hood
is used with Pro Line™ or Architect™
cooking products, the hood be vented to
the outside.
For vented or non-vented
installations:
For higher ceilings, 40" (10.2 cm)
chimney extention Kit No. 8285600 (for
Stainless Steel hoods) or Kit No. 8285601
(for Meteorite color hoods) is available
from your dealer. See page 4.

Publicité

Chapitres

Table des Matières
loading

Table des Matières