Product Overview; Intended Use; Adjustments - Pattfield Ergo Tools PE-AHH 20 Li Traduction De La Notice D'origine

1
2
3
4
5
6
7
8
9
1
1
154 EN
15
14
13
12
11
10
2 2
2

Product overview

1x
1 Cutting bar
2 Motor housing
3 Sleeve
4 Upper pole
5 Front handle
6
Cutting device cover
7 Battery (not included)
8 Battery release button
9 On/Off switch
10 1x Main handle
11 Release switch
12 Harness connector
13 Harness
14 Fixing screw
15 Angle adjustment button

Adjustments

ATTACH MOTOR HOUSING
1 Insert the bar 4 into the motor hous-
DE ing 2, so that the locking pin snaps into Lieferumfang
the little hole in the motor housing.
FR Etendue de livraison
IT Materiale compreso nella fornitura
NL Leveringsomvang
SV HARNESS Leveransomfång
1 Attach the harness 13 to the harness
CZ connector 12 Rozsah dodávky of the machine.
SK Caution! Before performing any Rozsah dodávky
work on the tool, remove the battery.
RO Volumul livrat
GB Scope of delivery

Intended use

1x
This garden tool is
– intended for cutting and trimming hedges
and bushes which have maximum branch
thickness of 16 mm;
– designed for maintaining hedges and bush-
es in the private sector,
– to use according to the descriptions and
safety instructions indicated in this operat-
ing manual.
1x
Any other use is not as intended. Improper use
is not covered by the warranty and the manu-
facturer will reject any liability. The user is li-
able for all injuries to third parties and damage
to their property. Operate the unit only in the
technical condition as stipulated and delivered
by the manufacturer. Arbitrary changes to the
unit will exclude the manufacturer from any li-
ability for resulting injury and/or damage.
2 Subsequently, screw the sleeve 3
firmly against the motor housing.
SET POLE LENGTH
2 (Release fixing screw 14 counter-
clockwise. Set the pole 4 to a suitable
length. Fasten the fixing screw clock-
wise.
Caution! Loose connections may
cause loss of control and injuries.
EN 155