Operation; Manual Operation - Klarstein STUDIO LIGHT & FIRE 1 Mode D'emploi

EN
30

OPERATION

Manual operation

The On/Off switch is must be switched to ‚I' to begin operating the fireplace. It is
operated via the buttons on the left side of the fireplace under the canopy. The fireplace
will beep to indicate that it is powered up.
• Turn on the appliance by pressing the power switch on the main unit.
• To activate the Aame effect, press the Flame button. The indicator light will
illuminate, this can be activated without the heater operating.
Press 1x: low brightness
Press 2x or 3x: Increase brightness
Press 4x: Deactivate flame effect again
• The fan heater has two separate settings that are selected by pressing each function
button:
Button 1: 1000 W
Button 2: 2000 W
• To turn the heater off press the function button again and set the power switch to 0.