Menu: Standby; Menu: Reset - Optelec ClearView C Mode D'emploi

Optelec
- Press the Mode button to confirm your choice and exit the menu.

Menu: Standby

This menu item sets the time before the ClearView C goes into standby mode
to conserve power. Pressing any button will take the unit out of standby mode.
By default, the standby time is set to 15 minutes. The standby time can be set
to 5, 15, 30 minutes and 'never'.
By pressing the On / Off button, the unit will always go into standby mode first,
after which it will power down using the power off time setting.
- Activate the menu by pressing the Menu on the Advanced side of the
Control Pad.
- Use the Zoom dial to scroll through the menu items. Select the menu
option Standby and activate this menu by pressing the Mode button.
- Select the time after which the unit will go into standby mode with the
Zoom dial. Press the Mode button to confirm your choice. Selecting
'never' will disable the automatic standby function.
- Press the Mode button to confirm your choice and exit the menu.

Menu: Reset

This menu item lets you reset the ClearView C to the factory default settings.
- Activate the menu by pressing the Menu button on the Advanced side of
the Control Pad.
- Use the Zoom dial to scroll through the menu. Select the menu option
Reset and activate this menu option by pressing the Mode button.
- To restore the factory defaults, select 'yes' by using the Zoom dial.
Choosing 'no' will leave all settings as they are.
- Press the Mode button to confirm your choice and exit the menu.
Alternatively:
- Press and hold the Power button for 10 seconds.
English
ClearView C
29