INSTRUCTIONS FOR USE
REGULATOR
The crown has two positions
Starting the watch
Crown in position
position enables you to restart
the
manually by turning the crown
upwards ( ).
Important note: Do it before
each use (minimum 40 turns).
Setting the time
Pull the crown out to position
Turn the crown upwards ( ) to
move the hands to the required
time.
For accurate time-setting, ensure
that the last adjustment of the
hands is made in a clockwise
direction.
Neutral position
Time-setting position
. This
self-winding
movement
After this operation, push the
crown back to position
turn the crown downwards ( )
to ensure it turns freely.
Kindly remember : This watch
is guaranteed water-resistant to
3 bar (30 metres), provided that
the crown is in position
.
; then
.