Gram FS Mode D'emploi page 44

GB
List of signals
NB! During freezing down, the temperature
shown on the display is always 1°C lower
than the temperature at which the cabinet
was set before the freeze-down function
was selected.
-21 I -14 TEMP.
Normal condition. The panel shows the
actual freezer temperature, here -18°C.
-21 I -14 TEMP.
Temperature setting: Press TEMP and hold
it down. In a moment or two the display will
show the temperature setting, in this case
the factory setting of -18°C.
-21 I -14 TEMP.
When all lamps in the scale light up, the
temperature in the freezer is -14°C or higher
than can be shown on the scale.
-21 I -14 TEMP.
When the lamp under -21 lights up - and
only this lamp - the freezer temperature is
lower than can be shown on the scale.
-21 I
-21 I
When the two lamps at either end of the
scale flash alternately and the four middle
lamps light up there is a fault in the tempe-
rature sensor. Call a service technician. (In
the event of sensor fault an emergency pro-
gram will take over control until the service
technician arrives).
44
All manuals and user guides at all-guides.com
FREEZE
FREEZE
FREEZE
FREEZE
-14 TEMP. FREEZE
-14 TEMP. FREEZE
-21 I -14 TEMP.
Alarm: The lamps light up one after the
other along the scale, starting at the coldest
end. An acoustic alarm is given at the same
time.
-21 I -14 TEMP.
-21 I -14 TEMP.
When the lamp at the side of the FREEZE
key lights up, freezing down is in progress.
Freezing time setting: Press FREEZE and
hold it down. In a moment or two, one lamp
or two lamps on the display will light up.
The number of lamps that light up indicates
the selected number of freezing-down days.
NB! During freezing down, the temperature
shown on the display will be
either the actual temperature
(down to -21°C)
or 1°C lower than the temperature at
which the cabinet was set before the
freeze-down function was selected.
FREEZE
FREEZE
FREEZE