Changing Programme; Drying Cycle Complete / Removing Laundry - Electrolux EDE 37100W Notice D'utilisation

SELECTING ADDITIONAL FUNCTIONS
You can choose from the additional func-
tions (only with time programmes ) :
button 1 - DELICATE
button 2 - TEXTILE
DELICATE
Pressing this button allows drying to be
performed at a lower temperature, for deli-
cate items. The corresponding pilot light
comes on. This option can be used for time
controlled drying.
TEXTILE
Press the Textile button repeatedly, to se-
lect the desired option. The relevant light
will light up. You can select 2 different op-
tions: COTTON cycle: to be used for cot-
ton, and SYNTHETICS : to be used for syn-
thetic or delicate items.
STARTING THE PROGRAMME
Press the START PAUSE button 3. The
programme is started.
The programme phase is shown by appro-
priate lights; light 6 DRYING , light 5 END .
All manuals and user guides at all-guides.com
7 6 5 4
1 2 3

CHANGING PROGRAMME

To change a programme which has been
selected by mistake once the programme
has started, first turn the programme selec-
tor to "O" (OFF) position. The programme
is cancelled.
The programme can no longer be
changed directly once the programme
has started. If nevertheless there is an
attempt to change the programme on
the programme knob or if an function
button is pressed, led START PAUSE
starts flashing temporarily in yellow.
The drying programme is not however
affected by this (laundry protection).
DRYING CYCLE COMPLETE /
REMOVING LAUNDRY
Once the drying cycle is complete, the
lights END and FILTER (light4) are on. If the
buzzer function is active, an acoustic signal
will sounds intermittently for about one mi-
nute.
The drying cycles are automatically fol-
lowed by an anti-crease phase which
lasts around 30 minutes. The drum ro-
tates at intervals during this phase. This
keeps the laundry loose and free of
creases. The laundry can be removed
at any time during the anti-crease
phase. (The laundry should be taken
out towards the end of the anti-crease
phase at the latest to prevent creases
from forming.)
1. Open door.
2. Remove laundry.
3. Remove filter after clothes has been re-
moved. Clean the filter.
Warning! Before You place the filter,
please check it there is nothing inside
the filter seat.
4. Turn the programme selector to "O"
(OFF).
Important! Clean the filter after each drying
cycle.
5. Close the door.
electrolux 7