Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
To reduce the risk of personal injury, there must be sufficient space behind the treadmill.
This device requires a regular check-up to prevent physical injury. This means that bolts and nuts
should be frequently checked for cracks and sharp edges etc.
Defective components must be replaced immediately. If this is not possible, the device must be
put out of order until the necessary repairs have been made.
Electrical safety
This motorised treadmill must be grounded. Should it break or malfunction, grounding reduces the
risk of shock. The treadmill is equipped with a power cord with grounding conductor and an earth
connection in the plug. The plug must be inserted into an appropriate outlet that is properly installed
and grounded in accordance with all local codes and ordinance.
Important
There is risk of electric shock if the grounding conductor is not properly connected. If you doubt
whether this treadmill is earthed in the correct manner, please contact our service department. Do
not change the power cord or plug.
THE PRODUCT
If you open the carton, you will find the spare parts below.
1 Main frame 1set
D14 Allen wrench M5
1 PC
D5 Bolt M8X45 4PCS
C14 Safety cover 1 set
D30 Washer 8PCS
B18/B19 L/R Front cover 2PCS
D13 Screw driver 1PCS
B17 Book shelf 1PC
D2 Bolt M8X15 4PCS
D22 Screw ST4.2X20
4PCS
B25 Silicon oil 1 PC
D11 Screw ST4.2X25
4PCS
38
Publicité
Table des Matières
