Outputs - Dimplex WPR 2006 Notice De Montage Et Mise En Service

6.2

6.2 Outputs

Depending on the system configuration, the "Outputs" Menu
shows the "OFF or ON" status display for the following outputs:
E-8
All manuals and user guides at all-guides.com
System-specific parameters
Sets the desired room set temperature and I
ratio when room temperature regulation is
selected
Sets the temperature value by which the
heating characteristic curve of heating circuit 1
is to be lowered when the temperature is
lowered
Sets the temperature value by which the
heating characteristic curve of heating circuit 1
is to be raised.
Settings for cooling operation
Return set temperature in the system
Sets the desired return set temperature when
dynamic cooling is selected
Sets the room set temperature for silent cooling
The actual value is measured by room climate
control station 1
Rise in the minimum flow temperature
calculated from the measured values from the
room climate control station during silent
cooling. A raised value reduces the risk that
condensate will form.
Sets the DHW preparation
Sets the desired hot water temperature
Sets the time and weekday
The language for menu navigation can be
selected from the available languages
Display
Always
Always
Always
Always
Always
Always
Setting range Display
15.0 °C / 001 Heating circuit 1
... 20.0 °C .../ ...60 .. Heating circuit 1
reference room
30.0 °C / 999
0 K Heating circuit 1
...
19 K
0 K
...
19 K
Cooling function
Cooling function
10 °C Cooling function
... 15 °C ... Dyn. cooling
30 °C
15.0 °C Cooling function
... 20.0 °C ... Silent cooling
30.0 °C
1.5 K Cooling function
... 2.0 K ... Silent cooling
5.0 K
Domestic hot water
30 °C Domestic hot water
... 45 °C ... Sensors
85 °C
Always
DEUTSCH Always
ENGLISH
FRANCAIS
ITALIANO
CESKY