Shelf Support Rails - AEG B 890905 Notice D'utilisation

22 Care and cleaning
Installing the door and the glass panels
After you clean the door, install the glass panels in the opposite sequence. Make sure that
you put the middle panel of glass in the correct seats.
The glass panel "E" has a dot in one of the corners. When you install this panel, make sure
that the dot is in the top left corner of the glass panel.
The glass panel "D" has a decorative frame. When you install this panel, make sure that the
screen-printing is on the outer side. Make sure that the surface of the glass panel frame is
not rough when you touch it.
After you install the glass panels:
1. Install the right end of the aluminium
plate (A) in the recess in the holder "C".
2. Install the left end of the aluminium
plate "A" in the recess in the holder "B".
Install the holder "B". Make sure that all
components are attached correctly.

Shelf support rails

You can remove the shelf support rails to clean the side walls.
All manuals and user guides at all-guides.com
C
A
B
A