Swarovski Optik NL Pure Mode D'emploi page 10

Push the knob in firmly and rotate
slightly clockwise.
Release the pressure from the pin
and continue to turn it clockwise until
it clicks.
Note:
The pin is securely in place once you can no longer turn it
without pressure.
18
NL PURE / EN NL PURE / DE
3. OPERATION
3.1 ADJUSTING THE TWIST-IN EYECUP
There are different setting positions to choose from, offering
a different distance from the eye to the eyepiece lens. This
allows you to adjust the eyecups separately to the position
that suits you.
Pos. A: Starting position without
spectacles: Turn the eyecups counter-
clockwise to the full extent.
Pos. B: Starting position with spec-
tacles: Turn the eyecups clockwise as
far as they will go.
Pos. C and D: There are two alterna-
tive intermediate stages for observing
with and without spectacles.
3.2 ADJUSTING THE DISTANCE BETWEEN
THE EYEPIECES
To see a single round image, adjust the two halves of the
binoculars until no irritating shadows can be seen.
NL PURE / EN NL PURE / DE
19