MasterCraft 052-0052-2 Manuel D'instructions page 4

3
model no. 052-0052-2 | contact us 1-800-689-9928
When servicing the meter, use only specified replacement parts.
●
Use caution when working with voltage above 30 V AC RMS, 42
●
V peak, or 60 V DC. Such voltages pose a shock hazard.
When using the probes, keep your fingers behind the finger
●
guards on the probes.
When making connections, connect the common test lead
●
before you connect the live test lead. When you disconnect test
leads, disconnect the live test lead first.
Remove the test leads from the meter before you open the
●
battery cover or the case.
Do not operate the meter with the battery cover or portions of
●
the case removed or loosened.
To avoid false readings, which could lead to possible electric
●
shock or personal injury, replace the battery as soon as the low
battery indicator (
When in Relative mode ("REL" is displayed) or in Data Hold
●
mode ("
hazardous voltage may be present.
Do not use the meter in a manner not specified by this manual
●
or the safety features provided by the meter may be impaired.
Adhere to local and national safety codes. Individual protective
●
equipment must be used to prevent shock and arc blast injury
where hazardous live conductors are exposed.
To avoid electric shock, do not touch any naked conductor with
●
your hand or skin, and do not ground yourself.
Do not use the supplied test leads with other equipment.
●
Do not use the meter if your hand or the meter is wet.
●
When an input terminal is connected to dangerous live potential,
●
it is to be noted that this potential can occur at all other terminals!
All manuals and user guides at all-guides.com
) appears.
" is displayed), caution must be used because