MasterCraft 052-0052-2 Manuel D'instructions page 24

Table des Matières

Publicité

23
model no. 052-0052-2 | contact us 1-800-689-9928
5.
Break the circuit path to be tested, and connect the test leads in
series with the circuit.
6.
Turn on power to the circuit, then read the display. For DC
current measurements, the polarity of the red test lead connec-
tion will be indicated as well.
NOTE:
1.
If you don't know the magnitude of the current to be measured
beforehand, select the highest range first and then reduce it
range by range until satisfactory resolution is obtained.
2.
In manual range mode, when the display shows "OL", a higher
range should be selected.
All manuals and user guides at all-guides.com

Publicité

Table des Matières
loading

Table des Matières