Table des Matières
Publicité
MAINTENANCE
Except replacing fuse and battery, never attempt to repair or service
the meter unless you are qualified to do so and have the relevant
calibration, performance test, and service instructions.
Store the meter in a dry place when not in use. Don't store it in an
intense electromagnetic field environment.
GENERAL MAINTENANCE
Periodically wipe the case with a damp cloth and a little mild
detergent. Do not use abrasives or solvents.
Dirt or moisture in the terminals can affect readings. Clean the
terminals as follows:
1.
Set the rotary switch to OFF position and remove all test leads
from the meter.
2.
Shake out any dirt which may exist in the terminals.
3.
Soak a new swab with alcohol.
4.
Work the swab around in each terminal.
If the meter fails, check and replace (as needed) the battery and
fuses, and/or review this manual to verify proper use of the meter.
All manuals and user guides at all-guides.com
32
Publicité
Table des Matières
