Error Correction - Deltafox DP-EAG 1225 Traduction De La Notice D'utilisation Originale

GB
Troubleshooting
Always unplug the angle grinder before working on it.
Risk of electric shock!
Problems
Device doesn't
start
Grinding tool does
not move although
the engine is run-
ning
Engine is slower
and stops
Grinding disc does
not rotate smoothly,
abnormal noises
can be heard
40
All manuals and user guides at all-guides.com
Possible Cause
Mains voltage missing
Main circuit breaker is tripped
On/off switch ( 4) may be
defective
Engine faulty
Grinding disc nut is loose
Workpiece, remaining work-
pieces or remaining grinding
tools block drive
Device is overloaded through
workpiece
Grinding disc nut is loose
Grinding disc is defective

Error correction

Check the socket, mains cable,
line, mains plug, repairs to be
carried out by qualified electri-
cian if necessary, check main
circuit breaker.
Repair by Customer Care
Tighten grinding disc nut (see
„Changing disc")
Remove blockages
Reduce pressure on grinding
tool
Workpiece unsuitable
Tighten grinding disc nut (see
„Changing disc")
Change grinding disc