Symbols And Icons - Deltafox DP-EAG 1225 Traduction De La Notice D'utilisation Originale

GB
Sound power level (L
measured ........... 98,9 dB(A); K
Vibration (a ) ......... 9,581 m/s
h
The vibration values represent maximum
values which have been determined with
the supplied blade. The actual vibration
values may vary depending on the used
accessories.
The vibration values are still affected by
the handling for the user's.
Levels of noise and vibration were deter-
mined according to the norms and regula-
tions in the declaration of conformity.
The vibration emission value has been
measured according to a standardised
testing method and may be used for com-
parison with another electric tool.
The indicated vibration emission value
may also be used for an introductory as-
sessment of the exposure.
Warning:
The vibration emission value whilst
actually using the electrical tool
may vary from the given values in-
dependently of the type and way in
which the electric tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).
26
All manuals and user guides at all-guides.com
)
WA
= 3 dB
WA
; K= 1,5m/s
2
Notes on safety
Caution! When using power tools,
2
observe the following basic safety
measures for the prevention of
electric shocks and the risk of in-
jury and fire.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.

Symbols and icons

Symbols on the device:
Warning!
Risk of injury from the rotating tool!
Keep hands away.
Warning! Electric shock hazard.
Always unplug the device before
working on it.
Read the manual!
Wear ear protection
Wear eye protection
Wear breathing protection
Risk of cuts! Wear cut-resistant
gloves.
Safety class II (Double insulation)
Electrical machines do not belong
with domestic waste.
Other symbols on the cutting disc:
Do not use for side grinding