Practical Tips; Scrubbing Wheels; Cutting Disc; Grinding With A Wire Brush - Deltafox DP-EAG 1225 Traduction De La Notice D'utilisation Originale

GB

Practical tips

When selecting the tool, ensure
that its specified permissible
rotation speed is at least as high
as the maximum rotation speed
specified on the angle grinder.
When selecting the disc, pay at-
tention to the maximum permis-
sible diameter and the maximum
permissible thickness.
Pay attention to the thread size
M14 when selecting the brush.

Scrubbing wheels

Never use a cutting wheel for
scrubbing !
The device must only be oper-
ated with the protective hood
mounted when the rough grind-
ing wheel is used.
Exert only moderate pressure on the
workpiece. Move the device evenly back
and forth.
A working angle of 30° to 40° achieves the
best results for scrub grinding.
Grinding with a wire
brush
Ensure that you observe the per-
missible speed when selecting
the wire brush. The permissible
rotation speed of the wire brush
must be at least as high as the
highest rotation speed indicated
on the angle grinder.
Wear protective goggles: wires
may become released!
34
All manuals and user guides at all-guides.com
Suitable for rough rust removal, cleaning
weld seams and removing paint.
Press the wire brush with medium force
onto the workpiece to be processed.
Do not exert excessive strain on the wire
brush by pressing down too hard.

Cutting disc

Never use a scrubbing wheel for
cutting !
The device must only be oper-
ated with the protective hood
mounted when the cutting disc
is used.
Only certified, fibre-reinforced cutting or
grinding discs may be used.
In general, work with small scrubs. Exert
only moderate pressure on the workpiece.
Always work in the counter-direction. This
ensures that the device is not pushed out
of the cut through lack of control.
Assembly
Caution! Risk of injury!
- Ensure that you have sufficient
space in which to work, and that
you do not endanger other peo-
ple.
- All hoods and protective devices
must be assembled properly
before commissioning.
- Disconnect the mains plug be-
fore changing the setting on the
device