Safety Instructions For All Applications - Deltafox DP-EAG 1225 Traduction De La Notice D'utilisation Originale

All manuals and user guides at all-guides.com
power tool's operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less Iikely to
bind and are easier to control.
Use the power tool, accessories
•
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of the
power tool for operations different from
those intended could result in a haz-
ardous situation.
Service:
• Have your power tool serviced by a
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power
tool is maintained.
Safety instructions for all
applications
Common safety instructions for grind-
ing, working with wire brushes and
cutting grinders:
• This electric tool is to be used as
a grinder, wire brush and cutting
grinder. Follow all safety instruc-
tions, directives, illustrations and
facts which you receive with the de-
vice. If you do not follow these instruc-
tions, an electrical shock, fire and/or
serious injury may occur.
• This electric tool is not suitable for
sanding and polishing. Using the
electric tool in ways for which it is not
intended may cause hazards and inju-
ries.
• Do not use any accessories that
are not specifically intended and
recommended for this electric tool
by the manufacturer. Simply because
an accessory can be attached to your
electric tool does not guarantee safe
operation.
• The allowable rotation speed of the
attachment tools must be at least
as high as the highest rotation
speed indicated on the electric tool.
Accessories that run faster than the al-
lowable speed can break and fly apart.
• The outside diameter and thickness
of the attachment tool must corre-
spond to the dimensions indicated
for your electric tool. Attachment
tools which are wrongly dimensioned
cannot be sufficiently shielded or con-
trolled.
• Attachment tools with threaded at-
tachment must fit the threading of
the grinding spindle exactly. For at-
tachment tools which are mounted
through a flange, the diameter of
the hole in the attachment tool must
fit the mounting diameter of the
flange. Attachment tools which cannot
be precisely attached to the electric
tool turn unevenly, vibrate very strong-
ly and can ultimately lead to a loss of
control.
• Never use damaged attachment
tools. Check attachment tools such
as grinding discs for chipping or
cracks, grinding plates for cracks,
wear or strong abrasion and wire
brushes for loose or broken wires
before using them. If the electric
tool or the attachment tool falls off,
check whether it is damaged or, use
an undamaged attachment tool. If
you have checked the attachment
tool and attached it, keep yourself
GB
29