Aligning The Refrigerator Doors (Optional); Using Your Refrigerator; Setting The Refrigerator Temperature; Setting The Freezer Temperature - Insignia NS-RFD21SS9-C Guide De L'utilisateur

Aligning the refrigerator doors (Optional)

Your refrigerator doors can be aligned if they are uneven.
1 Turn the levelling screw on the lowest door clockwise until the doors are even.
2 If the doors are still uneven, turn the adjustable pin on the lowest door using a 1/4" hex-key wrench.

Using your refrigerator

CAUTION: Never close the refrigerator or freezer doors while the shelves, drawers, or telescopic slides are extended. It may damage
both them and your refrigerator.

Setting the refrigerator temperature

• Press Fridge on the control panel repeatedly to set your refrigerator to your desired temperature between 34°F and
46°F (1.1°C and 7.8°C).
Note: By default, the refrigerator temperature is set to 37°F (2.8°C).

Setting the freezer temperature

• Press Freezer on the control panel repeatedly to set your refrigerator to your desired temperature between -6°F and
6°F (-21°C and -14.4°C).
Note: By default, the refrigerator temperature is set to 0°F (-17.8°C).

Using the door alarm

• Press Door Alarm on the control panel to turn the door alarm on or off. The alarm beeps after the door is left open for
more than two minutes, and it continues to beep until the door is closed.
16
All manuals and user guides at all-guides.com
Levelling screw
www.insigniaproducts.com
21 Cu. Ft. French Door Refrigerator