Removing The Refrigerator Doors (Optional) - Insignia NS-RFD21SS9-C Guide De L'utilisateur

NS-RFD21SS9-C
All manuals and user guides at all-guides.com

Removing the refrigerator doors (optional)

If the opening to the installation area you chose is too narrow for your refrigerator to pass through, remove the doors and
drawers, then move your refrigerator sideways into the area.
Note: Do not remove the doors unless you have to.
You will need the following tools to remove the refrigerator doors:
Flat-blade screwdriver
Torx T-20 screwdriver
Phillips screwdriver
1/4" Hex-Key wrench
5/16" or 3/8" socket
Level
ratchet
1/2" and 7/16" wrenches
1 Tape the refrigerator doors shut, then make sure that your refrigerator is unplugged.
2 Remove the hinge cover on the top left of your refrigerator using a Phillips screwdriver.
Hinge screw
Hinge cover
13
www.insigniaproducts.com