Epson BrightLink 455Wi Guide Rapide page 5

6. Launch Easy Interactive Driver on your computer. You should see the
pen icon in lower right corner of your screen (Windows
®
(Mac OS ). If you don't see the icon, see page 14 or do one of the following:
■
Windows: select
Projector
■
Mac OS: open the Applications folder, then select the
icon.
Driver
7. Calibrate your system (see page 15).
■
Windows: click the
(lower right corner of your screen), then select
■
Mac OS: click the
menu bar, then select
■
After you read the message about calibration, click
.
OK
■
Use the interactive pen to touch each flashing green
circle as it appears. Continue until all the circles stop
flashing and turn black.
■
Hold the pen at an angle, and make sure you are not casting a shadow on
the pen.
■
If you make a mistake, press
calibration.
8. Launch TeamBoard Draw (see page 18).
■
Windows: select
Teamboard
■
Mac OS: Select the
You see the TeamBoard Draw dashboard:
or
Start
>
Easy Interactive Driver
pen icon in the system tray on your taskbar
pen icon in the Dock, select
Calibrate (Normal)
or
Start
>
Annotation
TeamboardAnnotate
Collapse
Select Freehand or
dashboard
Rectangle to capture screen
Open drawing
toolbar
Open whiteboard screen
>
All Programs
.
.
on your computer keyboard and restart
Esc
>
All Programs
.
Use virtual keyboard
®
) or in the Dock
or >
Programs Epson
Easy Interactive
Calibrate (Normal)
from the
Calibrate
or >
Programs
icon on your screen.
Open
application
list
Quick Projector Setup
.
5