Performing Calibration - Epson BrightLink 455Wi Guide Rapide

Performing Calibration

Two types of calibration are available:
■
Normal, which is faster and appropriate for most situations (25 calibration
points)
■
Advanced, which is recommended when you are projecting very detailed
images and need higher accuracy (49 calibration points)
You may need to recalibrate if you use a different computer, change your
computer's resolution, press the
using the remote control. You will also need to recalibrate if you change the
following settings in the projector's menu system:
, ,
Tracking Sync Position
1. To start calibration, do one of the following:
Windows: click the
right corner of your screen), then select
.
(Advanced)
Mac OS: click the
menu bar, then select
You see the following message:
2. After you read the message, click
button, or change the projector's aspect ratio
Auto
, ,
Aspect Keystone
pen icon in the system tray on your taskbar (lower
pen icon in the Dock, select
Calibrate (Normal)
.
OK
Auto Setup
, or .
Zoom
Calibrate (Normal)
Calibrate
or
Calibrate (Advanced)
Calibrating the Projector
, ,
Resolution
or
Calibrate
from the
.
15