Folding & Transporting - Drive Travelite TC005GY Guide D'utilisation

Note: The folding procedure is essentially the assembly procedure
in reverse.
2. Pull the armrest release button while pulling up on the armrest to
release. Flip the armrest back until they are hanging vertically down
from the chair.
3. Flip up the footplates and lift up the footplate receivers. Press
the brass push button and push the footplate back while rotating
approximately 90º until it locates in the receiver hole nearest
the chair.
4. Lift the chair by the two lift up straps and the chair should naturally
fold up. The chair can be carried using the lift up straps.
5. If required, unzip the carry bag and insert the chair. If necessary
rotate the front castors to allow the chair to fit in the bag. Zip up the
bag and carry using the two handles.
The Travelite is not suitable for use as a seat in a motor
!
vehicle. Users should always transfer to the vehicle's seat.
folding and transporting
1. Press the release paddle on the
half fold back mechanism with
your thumb while lightly pulling
the push handle down