Assembly Instructions - Drive Travelite TC005GY Guide D'utilisation

1. Fold out the seat fully by pushing down on the four corners of the
seat. Ensure the seat is folded out fully otherwise the armrests
may not locate properly.
Note: There are two 'Drive' labels included for you to apply to mark
your desired footplate height in the future.
Rev.4.11.11.14

assembly instructions

2. Flip the arm rests around until
they locate in to the arm rest
receivers (as shown in the
photo left). The armrest release
button will click to indicate that
the armrest has securely locked
in position.
3. Pull down the footplate receivers.
Then push the brass button and
pull down while rotating the
footplate until it locks in to
position (as shown in the photo
left). Flip down the footplates.
4. Pull up the push handle until it
locks in to position.
You will hear a click when the
handle is securely locked.
Repeat for the other handle.