Tools & Parts; Tools Needed; Parts Supplied - Maytag MDG17MN Instructions D'installation

Tools Needed:

200 mm (8")
or 250 mm (10")
pipe wrench
25 mm (1") hex-head
socket wrench
level
caulk gun and caulk
(for installing new exhaust vent)
25 mm (1")
open-end wrenches

Parts Supplied:

foot boots (4)
NOTE: The circuit diagram for this dryer is located inside the
lower front panel, within the Tech Sheets.
All manuals and user guides at all-guides.com
200 mm (8") or 250 mm (10")
adjustable wrench
that opens to 25 mm (1")
8 mm (5/16") socket wrench
utility knife
vent clamps
leveling legs (4)
TOOLS & PARTS
flat-blade screwdriver
pliers
(that open to 39 mm [1 / "])
9
16
ruler or measuring tape
pipe-joint compound
suitable for gas type
phillips screwdriver
686 mm (27") wood block
putty knife
flashlight (optional)
7