Leveling - Maytag MDG17MN Instructions D'installation

LEVELING

Leveling your dryer properly reduces excess noise and
vibration.
1. Remove cardboard from beneath dryer. Place a level on top
edges of dryer, checking each side and front. If not level, tip
dryer and adjust legs up or down as shown in Steps 3 and
4, repeating as necessary.
Not Level
2. Grip dryer from top and rock back and forth, making sure
all four legs are firmly on floor. Repeat, rocking dryer from
side to side. If dryer rocks, go to Step 3 and adjust leveling
feet. If all four legs are in firm contact with floor, go to
Step 4.
16
All manuals and user guides at all-guides.com
LEVEL Not Level
3. If dryer is not level, use a 25 mm or 1" open-end or
adjustable wrench to turn jam nuts clockwise (as viewed
from above) on legs until they are about 13 mm (1/2")
from the dryer cabinet. Then turn the leveling leg
counterclockwise to lower the dryer or clockwise to raise
the dryer. Recheck levelness of dryer and that all four legs
are firmly in contact with the floor. Repeat as needed.
HELPFUL TIP: You may want to prop up front of dryer
about 102 mm (4") with a wood block or similar object that
will support weight of dryer.
jam nut
Jam nut
4. When dryer is level and all four legs are firmly in contact
with the floor, use a 25 mm or 1" open-end or adjustable
wrench to turn jam nuts counterclockwise (as viewed from
above) on leveling legs tightly against dryer cabinet.
HELPFUL TIP: You may want to prop dryer with wooden
block.