Transport; Storgae - Zipper Maschinen ZI-BRM420 Manuel D'utilisation

18

TRANSPORT

Never lift or transport the machine with the engine running!
19

STORGAE

 To reduce the risk of fire, keep the engine, silencer, battery compartment and fuel tank
free of grass, leaves or excessive grease.
 Allow the product to cool for at least 30 minutes before storage.
 Before storage, clean the mower thoroughly and store it in a dry, frost-free place.
 Never store the mower with fuel in the tank inside a building where it can reach an open
flame or spark.
 If the fuel tank needs to be emptied, this should be done outdoors.
If the machine is not used for a longer period of time (>30 days):
 Empty the oil or fuel tank.
 Remove the spark plug and pour a few drops of engine oil into the cylinder. Using a rope
starter, turn the engine a few times so that the oil is well distributed inside the cylinder.
(Clean spark plug before reuse!)
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-BRM420 und ZI-BRM508
1. Take off the spark plug cap and
remove any dirt underneath.
2. Remove the spark plug with a spark
plug wrench.
3. Check the spark plug. Replace it if
the electrodes are worn out or if the
insulator is torn or broken.
4. Measure the electrode gap of the
spark plug with a suitable measuring
device. The distance should be 0.7 -
0.8 mm. If necessary, correct the
gap by carefully bending the side
electrode with a suitable tool.
5. Fit the spark plug cap.
WARNING
TRANSPORT
40