Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
15
ASSEMBLY
Checking Delivery Content
Check the machine immediately after delivery for transport damage and missing parts.
Assemling the Machine
The machine comes pre-assembled, only the parts dismantled for transport have to be
reassembled.
ZIPPER MASCHINEN GmbH
www.Zipper-Maschinen.at
ZI-BRM420 und ZI-BRM508
WARNING
CAUTION
NOTICE
1. Handle Assembly
Open the handle attached to the frame
and screw the handle parts tight with the
four screws (1) and star knobs (2), 2x
each on the left and right side.
Note:
The height of the handle can be
adjusted by adjusting the position of the
screws. Screw inserted at position H for a
high handle position, L for a lower handle
position. Please select the same setting on
the left and right side.
The starter handle of the cable pull can be
attached to the handle to facilitate the
starting process (only available for ZI-
BRM508).
ASSEMBLY
29
Publicité
Table des Matières
